Setting instructions: Single-row pot dispenser M000

How do I set the single-row pot dispenser M000 ?

TM 1010F with pot dispenser M000

Our reliable single-row pot dispenser M000 is not only quick and easy to set, another advantage of this dispenser is its exclusively mechanical design. This means that no compressed air is required on the machines and the wear and maintenance caused by a pneumatic cylinder is non-existent. The easy changeover of this pot dispenser to other pot sizes in a few minutes makes this dispenser particularly flexible to use.

Our step-by-step instructions will help you with this. The single row pot dispenser M000 is available for the following potting machines: TM 1010F, the TM 1810F, the TM 2400E and TM 2400DR.

Our step-by-step instructions for pot size adjustment
of the single-row pot dispenser M000 using the TM 1010F as an example: 

Step 1: Adjust the turntable to the appropriate pot size using the crank handle
Step 2: Throttle the turntable speed
Step 3: Move the drill motor to the lowest position
The upper holding jaw and the ejector are now standing apart
Step 4: Open the clamp and use the crank to set the appropriate width
The uppermost pot edge now rests on the uppermost holding jaw
Step 5: Secure the clamp
Step 6: Move the drill motor up and remove the cover
Step 7: To adjust the lower pot diameter, loosen the locking screw with an open-end wrench
Step 8: Position the lower holding jaw below the edge of the pot
Step 9: Tighten the locking screw again
Step 10: Adjust the distance between the pots so that the upper holding jaw and the ejector are between the last two pots
Step 11: Open clamp
Step 12: Support with your hand and adjust the height
Step 13: Once the correct position is achieved, close the clamp and reattach the cover

And your perfectly adjusted pot dispenser is ready! 

Setting video

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

For more information about our machine portfolio and service, please contact your Mayer representative or send us an e-mail to service@mayer.de. We look forward to your inquiry! 

  • We are available for you – by phone, e-mail and fax.
  • We support you with your individual project
  • We are happy to set up a video meeting for you via Microsoft Teams or Zoom 
  • Under exact observance of travel, contact and hygiene rules, we are also happy to come to you personally. 

To stay up to date on all things Mayer Planting Systems, follow us on our social media channels and subscribe to our newsletter.

Share this:

Share this:

This might also interest you

Planting Systems

Cultivate 2022

Cultivate 2022 – what a success! After two years of travel restrictions by Covid-19, it has finally been possible for

Weiterlesen »

Copyright 2020 © All Rights reserved. Design by Mayer Holding